Cover and padding for head restraint with slide-in locking mechanism, removing and installing

Fig 1: Cover And Upholstery For Headrests With Slide In Locking Mechanism Remove/Install Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove head restraint with slide-in locking mechanism → Head restraint, removing and installing .
• Using a screwdriver, pry out securing strips - 3  - (4x).
• Detach knob - 2  -.
• Detach cover and padding - 1  -.

Fig 2: Identifying Padding, Cover & Head Restraint Mount

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove padding - 2  - from cover - 3  -.

• Installing: 

• Insert padding - 2  - correctly into cover - 3  -.
• Insert head restraint mount - 1  - into padding with cover.
• Press fastening strips firmly into guide channel (pull to check).