Fuel Tank Leak Detection Control Module With Integrated Fuel Tank Pressure Sensor, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specification. Refer to OVERVIEW - EVAP CANISTER AND LEAK DETECTION SYSTEM .

NOTE:

Replace the seal.

-- Install the EVAP canister. Refer to EVAP CANISTER, REMOVING AND INSTALLING .