LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> S4 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 706 (Exterior Body Panels (Hood, Lids) (Sedan)) >> (55 Hood, Lids) >> Rear Lid >> Lid Latch Emergency Release >> Routing on the Body Side

Routing on the Body Side

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Routing Release Cable On The Body Side
GWWA55-10328Courtesy of AUDI OF AMERICA, LLC
  1. Release Cable
    • Starting from the lid latch, route the cable over the lid hinge and into the vehicle interior as illustrated.
  2. Lid Latch
  3. Lid Hinge
  4. Cover
    • Mounted on the lid hinge and attach it to the back side with the straps.
    • The cable must be correctly routes into the cover.
  5. Clip
    • The clips have been prepositioned and must be clipped into the holes.
scientia non olet · About LEMON Manuals