LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> S4 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Engine Mechanical - 4.2L V8 - Art, Awn, BBD) >> Engine - Cylinder Head, Valvetrain >> Cylinder head, removing and installing >> Camshafts and camshaft adjusters, removing and installing >> Tightening torques

Tightening torques

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2004 Audi A6, 2003 Audi S6, 2003 Audi A6, 2002 Audi S6, and 2002 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES: CAMSHAFTS AND CAMSHAFT ADJUSTERS

Component Nm/ft lb
Bearing cap to cylinder head 5/4 + 90°
Camshaft adjuster to cylinder head 5/4 + 90°
Camshaft Position (CMP) sensor rotor to camshaft 23/17
Camshaft Position (CMP) sensor housing to cylinder head 10/7
scientia non olet · About LEMON Manuals