Checking Synchronizer Ring For Wear

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi S5, 2015 Audi S5, 2014 Audi S5, 2013 Audi A5, and 2012 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Checking Synchronizer Ring For Wear

Courtesy of AUDI OF AMERICA, LLC

-- Press the synchronizer ring -E- into the locking collar and then measure the gap dimension -a- using a depth gauge -D- at -A-, -B- and -C-.

-- Add measured values and divide by 3.

Determined value must not exceed 0.5 mm.