Work step 2: Erase DTC Memory: Notes

WARNING: This page is about a different car, the 2004 Audi A6, 2003 Audi A6, 2002 Audi A6, 2001 Audi A6, and 2000 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.

Ignition switched on

When indicated on display

Fig 1: VAG 1551 Scan Tool Display - Work Step 2, Erase DTC Memory (1 Of 2)

Courtesy of AUDI OF AMERICA, INC.

Press button -0- and -5- to select function "Erase DTC Memory" and press -Q- button to confirm input.

NOTE: When DTC memory is erased, readiness code is reset and must therefore be re-generated.

When indicated on display

Fig 2: VAG 1551 Scan Tool Display - Work Step 2, Erase DTC Memory (2 Of 2)

Courtesy of AUDI OF AMERICA, INC.

Press --> button.