Readiness code: Notes

WARNING: This page is about a different car, the 2004 Audi A6, 2003 Audi A6, 2002 Audi A6, 2001 Audi A6, and 2000 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.

The readiness code is a 8 digit display in measuring value block 086, display field 1. Each of the 8 digits is assigned to a specific exhaust related system.

If the function of these systems is checked via a test by On Board Diagnostic (OBD), which is successfully completed, then the position assigned to this system will be switched from "1" to "2". This occurs regardless of whether the test is indicated as "OK" or "not OK" as long as the test is successfully completed.

If a test is completed, but indicated as "not OK", a DTC will be stored in the DTC memory. Check DTC memory. See DIAGNOSTIC TROUBLE CODE (DTC) MEMORY, CHECKING AND ERASING .

When the readiness code is generated after a successfully completed test, "00000000" will be displayed. (Measuring value block 086, display field 1)