Bumper crossmember, removing from cover

Bumper cover removed.
Remove signal horn - 4 -.

Fig 1: Crossmember, removing from cover and installing

GW00020348

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Disconnect hose - 5 - of headlamp cleaning system on both sides (press release buttons).
Unscrew bolts - 3 - of right spray jet for headlamp cleaning system - spray jet remains installed.
Remove bolts - 1 - (Qty. 5).
Pry off retaining clips - 2 - (Qty. 3).

Swivel spray jet for headlamp cleaning system to the side and remove crossmember from bumper cover.