Convertible top position switch (Convertible Top Open Position Switch F171/Convertible Top Closed Position Switch F202), removing
- Remove rear side trim →
- 70 - INTERIOR TRIM
- 70 - INTERIOR TRIM for BODY INTERIOR - CABRIOLET
- Disconnect electrical connector on Convertible Top Control Module J256.
- Remove convertible top cable from guides and cable ties for body wall and convertible top frame.
- Remove switch bolts - 1 -.
- Carefully remove convertible top position switch from bolting point mounts.
NOTE:
- The convertible top switch unit described is located on the right main guide.
- The convertible top should be brought to the appropriate position to remove respective convertible top switch unit bolt.
Tightening torque → Convertible top - assembly overview .