Cleanliness rules

CAUTION: Hydraulic oil damages paint. Immediately remove any hydraulic oil that has come in contact with painted surfaces.

Clean connecting points and surrounding areas before loosening.
Place removed parts on a clean surface and cover. Use foil and paper. Do not use cloths with lint!
Carefully cover or seal opened components if the repair will not be done immediately.
Only install clean parts: Only remove replacement parts from packaging right before installation.

Place collecting container or foil and cloths under connections to be opened so that hydraulic oil does not come into contact with painted surfaces.
Seal open hydraulic lines with cover caps to prevent hydraulic oil from leaking out.