Rear lid lock and handle mechanism, removing and installing

1 - Rear lid lock

• To remove, unclip operating rod from swiveling bush and disengage.

2 - Swiveling bush

• After installing rear lid lock, engage operating rod and secure.

3 - Nut

• 8 Nm

4 - Operating rod

5 - Release

6 - Lock cylinder

• Removing: 

• Disconnect electrical connectors.
• Disengage release from lock cylinder.
• Remove bolt.
• Twist lock cylinder 90°.

• Remove lock cylinder from handle mechanism.

7 - Screw

• 8 Nm

8 - Motor

• Country versions

9 - Handle

• Removing: 

• Remove rear lid trim.
• Remove lock cylinder.
• Remove bolts.
• Press in catches - arrows  -.

• Remove grip piece.

10 - Nut

• 8 Nm