Front hood seal (from model year 2006) - assembly overview

Fig 1: Front Hood Seal (From Model Year 2006) - Assembly Overview

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Gasket for lock carrier

• Apply gasket at left and right on foam piece.
• When doing this, make sure it is applied without gaps.
• Compress excess length of gasket along lock carrier.

2 - Left sealing profile

• Self-adhering, adhesion surfaces must be free of dust and grease.

3 - Gasket for plenum chamber

• Apply gasket at left and right on foam piece.
• When doing this, make sure it is applied without gaps.
• Compress excess length of gasket along front panel of plenum chamber.