Cowl panel trim, removing and installing
1 - Cowl panel trim
- Removing:
- Remove wiper arms →
- 92 WINDSHIELD WIPER WASHER SYSTEM
- 92 WINDSHIELD WIPER & WASHER SYSTEM for ELECTRICAL EQUIPMENT, CABRIOLET
- Remove plenum chamber cover.
- Remove securing pins
- Remove trim from retaining strip at windshield, bottom.
- Remove trim upward.
- When installing, make sure that the trim engages completely into retaining strip.
2 - Support
3 - Windshield
4 - Securing pin
5 - Plenum chamber cover
6 - Gasket