Headlamp, Removing And Installing
WARNING:
Danger to life due to high voltage.
- Usage and safety information for gas discharge headlamps HID HEADLAMP USAGE AND SAFETY PRECAUTIONS .
Removal
-- Turn off the ignition and remove the key.
-- Turn the headlamp switch to "0".
-- Disconnect electrical connector -1-.
-- Release retaining clip -2- in direction of -arrow-.
-- Press retaining clip -3- down, and at the same time, remove headlamp housing -4- from mount.
Installation
-- Make sure the guides on the headlamp housing engage into the guides on the mount in direction of -arrows- when Installation the headlamp -1- into the mount -2-.
- The headlamp must slide into the mount gently without using force.
-- Slide headlamp into mount until it engages audibly.
-- Secure headlamp with retaining clip.
-- Adjust headlamps after Installation, refer to HEADLAMPS, ADJUSTING .