Headrest Overview

Fig 1: Identifying Headrest Assembly Overview

Courtesy of AUDI OF AMERICA, LLC

Headrest Cover
- Clipped in.
- Removing and Installing. Refer to HEADREST COVER, REMOVING AND INSTALLING .
Screw, Self-Locking
- 10 Nm
- Always replace if removed.
- Clean nut threads before installing new screws.
Headrest
- Removing and Installing. Refer to HEADREST, REMOVING AND INSTALLING .
Clip
- Depending on the version.
Cable
- Is a component of the head restraint.
- Cable routing depends on the version.
- Removing and Installing. Refer to HEADREST, REMOVING AND INSTALLING .
Cover and Upholstery
- Removing and Installing. Refer to HEADREST COVER AND CUSHION, REMOVING AND INSTALLING .
Mounting Pins
Spring
- Stored on the mounting pins.
- Attached to the backrest frame and control cam.
- Removing and Installing. Refer to HEAD RESTRAINT CONTROL CAM, REMOVING AND INSTALLING .
Control Cam
- Stored on the mounting pins.
- Removing and Installing. Refer to HEAD RESTRAINT CONTROL CAM, REMOVING AND INSTALLING .
Securing Clip
- Placed on the mounting pin.
- Removing and Installing. Refer to HEAD RESTRAINT CONTROL CAM, REMOVING AND INSTALLING .