Vacuum System, Checking

Special tools and workshop equipment required 

• Hand Vacuum PumpVAS6213

Procedure 

-- Check all vacuum lines in the vacuum system for:

• Cracks
• Damage caused by animals
• Crimps
• Leaks

-- Check the vacuum line leading and to and from the solenoid valve.

-- If there is a fault, check the vacuum lines for the named component, but also all the vacuum lines.

-- If using the Hand Vacuum PumpVAS 6213 does not produce any vacuum or if the vacuum drops again right away, then check the hand vacuum pump and the connection hoses for leaks.