Oil Pump, Removing And Installing: Installation
WARNING: This page is about a different variant/trim than selected.
Install in reverse order of removal. Note the following:
- Tightening specifications. Refer to OIL PUMP AND OIL PAN LOWER SECTION OVERVIEW .
NOTE:
Replace the oil baffle bolts.
-- Make sure the 2 dowel sleeves are in the oil pump. If they are not, install them.
-- Install oil pan lower section. Refer to OIL PAN LOWER SECTION, REMOVING AND INSTALLING .
-- Fill engine oil and check the oil level. Refer to Maintenance Booklet 406.