Reducing Agent Metering System Control Module -J880-, REMOVING AND INSTALLING: Removal
WARNING: This page is about a different variant/trim than selected.
CAUTION:
Danger of causing damage to other electronic components when disconnecting the battery.
- Complete the steps for disconnecting the battery.
- Pay attention the to waiting period for vehicles with urea injection.
-- Disconnect the ground cable -4- from the battery terminal. Refer to GROUND CABLE WITH Battery Monitoring Control Module -J367- FROM MY 09, REMOVING AND INSTALLING .
-- Remove the right rear single seat in the second row of seats. Refer to Seat Frames .
-- Remove the right rear entry lamp. Refer to DOOR WARNING LAMP AND REAR ENTRY LAMP, REMOVING AND INSTALLING .
-- Press the floor covering to the side and disconnect the connector -1-.
-- Remove the nuts -2 and 4- and remove the Reducing Agent Metering System Control Module -J880- -3-.