Left Exhaust Manifold, Removing And Installing: Installation
WARNING: This page is about a different variant/trim than selected.
Install in reverse order of removal. Note the following:
- Tightening specifications. Refer to EXHAUST MANIFOLD OVERVIEW .
NOTE:
Replace the seals, o-rings and the self-locking nuts.
Secure all hose connections with hose clamps of the same type as those equipped by the factory.
-- Install the power steering hydraulic fluid line. Refer to POWER STEERING, CHECKING HYDRAULIC OIL LEVEL .
-- Install the left intermediate pipe. Refer to LEFT INTERMEDIATE PIPE, REMOVING AND INSTALLING .