Special Tools

Special tools and workshop equipment required 

• Puller - Toothed Belt PulleyT10320
  Fig 1: Identifying Puller T10320

  Courtesy of AUDI OF AMERICA, LLC
• O-Ring Assembly SleeveT10377
  Fig 2: Guide Sleeve T10377

  Courtesy of AUDI OF AMERICA, LLC
• Crankshaft SocketT40058
  Fig 3: Adapter (Socket) T140058

  Courtesy of AUDI OF AMERICA, LLC
• Union Nut SocketT40055
  Fig 4: Identifying Socket T40055

  Courtesy of AUDI OF AMERICA, LLC
• High Pressure Pump Sprocket Locking ToolT40135 for adjusting the high pressure pump.
  Fig 5: Identifying Locking Tool T40135

  Courtesy of AUDI OF AMERICA, LLC
• Torque Wrench 1331 Insert - Open Jaw - 17mmVAG1331/6
  Fig 6: Assembly Tool SW 17 V.A.G 1331/6

  Courtesy of AUDI OF AMERICA, LLC
• Test Box Kit - AdapterVAG1598/39-1
• Test Box Kit - 94 Pin AdapterVAG1598/39-2
• Test Box Kit - 105 Pin Test Box KitVAG1598/42
  Fig 7: Adapter Cable V.A.G 1598/39 & Test Box V.A.G 1598/42

  Courtesy of AUDI OF AMERICA, LLC
• Wiring Harness Repair Set - Hot Air BlowerVAS1978/14A -1- with nozzle attachment -2- from the Wiring Harness Repair SetVAS1978B
• Small commercially available locking pliers -3-
  Fig 8: Heat Gun, Adapter Nozzle And Locking Pliers

  Courtesy of AUDI OF AMERICA, LLC
• Hand Vacuum PumpVAS6213
  Fig 9: Hand Vacuum Pump VAS 6213

  Courtesy of AUDI OF AMERICA, LLC
• Fuel Return System TesterVAS6330
  Fig 10: Identifying Tester for Fuel Return System VAS 6330

  Courtesy of AUDI OF AMERICA, LLC
• Breakout Box w/Detachable TerminalsVAS6606
• Test Adapter - Isolator Box 1VAS6606/1 with the following:
• - Isolator Box - Module 2VAS6606/2
• - Isolator Box Module 3VAS6606/3
• - Template - Isolator BoxVAS6606/1-1
• - Isolator Box - Module 2 TemplateVAS6606/2-1
• - Template - Isolator BoxVAS6606/3-1
• - VAS6606/7
  Fig 11: Breakout Box w/ Detachable Terminals VAS6606

  Courtesy of AUDI OF AMERICA, LLC
• Return Flow MeterVAS6684
  Fig 12: Return Flow Meter VAS6684

  Courtesy of AUDI OF AMERICA, LLC
• Pry Lever80-200
  Fig 13: 80-200 Pry Lever

  Courtesy of AUDI OF AMERICA, LLC
• Wrench - Pin Type3036
  Fig 14: Identifying Counter-Hold Tool 3036

  Courtesy of AUDI OF AMERICA, LLC
• Hose Clamps - Up To 25 mm3094
  Fig 15: 3094 Hose Clamps

  Courtesy of AUDI OF AMERICA, LLC
• Crankshaft Holder3242
  Fig 16: Crankshaft Holder 3242

  Courtesy of AUDI OF AMERICA, LLC
• Ring Wrench 7-Piece Set3337
  Fig 17: 3337 Oxygen Sensor Ring Spanner

  Courtesy of AUDI OF AMERICA, LLC
• Not illustrated:
• Hose Clamps - Up To 25mm3094
• Puller - Unit InjectorT10055 with Puller - Unit Injector - Adapter 1T10055/1
• Puller - Toothed Belt PulleyT10320
• 30 mm Open End WrenchT10553
• Union Nut SocketT40055
• Puller - PulleyT40064
• High Pressure Pump Sprocket Locking ToolT40135
• Fuel Measuring UnitVAG1348/2B