LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (3.0L - Diesel Fuel Injection - Engine Code: CATA) >> 23 Diesel Fuel Injection >> Injection System Components >> Mass Airflow Sensor -G70-, REMOVING AND INSTALLING >> Removing

Mass Airflow Sensor -G70-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different variant/trim than selected.

-- Disconnect electrical harness connector at Mass Airflow Sensor -G70-.

-- Open the clamp on the air guide hose and disconnect the hose from the Mass Airflow Sensor -G70-.

-- Remove bolts -arrows-.

Fig 1: Identifying Mass Air Flow (MAF) Sensor G70 Bolts
GWWA23-10118Courtesy of AUDI OF AMERICA, LLC

-- Remove the mass air flow sensor from the guide on the air filter upper section.

scientia non olet · About LEMON Manuals