LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (3.0L - Fuel Supply System - Engine Code(S): CATA & CNRB) >> 20 Fuel Supply >> Accelerator Pedal Mechanism >> Accelerator Pedal Module Overview

Accelerator Pedal Module Overview

WARNING: This page is about a different variant/trim than selected.
Fig 1: Accelerator Pedal Module Assembly Overview
GWWA20-10224Courtesy of AUDI OF AMERICA, LLC
  1. Bolt
    • 10 Nm
  2. Accelerator Pedal Module
    • With Accelerator Pedal Position Sensor -G79- and Accelerator Pedal Position Sensor 2 -G185-
    • Removing and installing, refer to ACCELERATOR PEDAL MODULE WITH THROTTLE POSITION SENSORS, REMOVING AND INSTALLING .
    • An adaptation may need to be performed after replacing, depending on the engine/transmission combination.
    • If there is a menu option in "Guided Functions", perform an adaptation, refer to Vehicle Diagnostic Tester
  3. Connector
  4. Bolt
    • 10 Nm
  5. Lower Driver Side Instrument Panel Cover Mount