Oil Pan, Oil Strainer And MECHATRONIC, Assembly Overview: Notes

Fig 1: Identifying Oil Pan, Strainer And Mechatronic, Assembly Overview

Courtesy of AUDI OF AMERICA, LLC

1. Screw
   • 12 Nm
   • tighten diagonally
   • Securing oil pan to transmission
2. ATF Drain Plug
   • 12 Nm
   • Always replace the bolt.
3. ATF inspection and filler plug
   • 80 Nm
   • Always replace the bolt.
4. Oil Pan
   • ATF PAN, REMOVING AND INSTALLING 
5. Cover cap
   • inserted in oil pan opening
6. Magnet
   • ensure full surface contact
   • clean before installation
7. Oil pan seal
   • Always replace
8. ATF Strainer
   • OIL SCREEN, REMOVING AND INSTALLING 
9. Screw
   • 8 Nm
   • Note different lengths
   • Following removal and installation instructions MECHATRONIC, REMOVING AND INSTALLING 
10. Mechatronic
    • MECHATRONIC, REMOVING AND INSTALLING 
11. Seal