Selector Lever Knob, Servicing, Assembly Overview: Notes

Overview:

Fig 1: Identifying Knob, Boot And Transmission Range Position Display Unit Overview

Courtesy of AUDI OF AMERICA, LLC

1. Clamp
   • For securing the selector lever handle to the selector lever
   • Removing and Installing. Refer to SELECTOR LEVER HANDLE, REMOVING AND INSTALLING .
2. Trim Ring
   • Removing and Installing. Refer to SELECTOR LEVER BOOT, REMOVING FROM SELECTOR LEVER HANDLE .
3. Selector Lever Handle
   • SELECTOR LEVER HANDLE, REMOVING AND INSTALLING 
4. Selector Lever Boot
   • SELECTOR LEVER BOOT, REMOVING FROM SELECTOR LEVER HANDLE 
5. Selector Lever Transmission Range Position Display Unit -Y26-
   • Must not be removed to remove selector lever handle.
   • Selector Lever Transmission Range Position Display Unit -Y26-, REMOVING AND INSTALLING