Shift Mechanism, Servicing, Assembly Overview: Notes

Overview:

Fig 1: Identifying Selector Mechanism Overview

Courtesy of AUDI OF AMERICA, LLC

1. Selector Lever Cable
   • Do not bend
   • SELECTOR LEVER CABLE, ASSEMBLY OVERVIEW 
   • SELECTOR LEVER CABLE, REMOVING AND INSTALLING 
   • SELECTOR LEVER CABLE, ADJUSTING 
2. Locking Plate
   • Assembly instructions SELECTOR LEVER CABLE, ASSEMBLY OVERVIEW 
3. Selector Lever Cable Bolts
   • Assembly instructions SELECTOR LEVER CABLE, ASSEMBLY OVERVIEW 
4. Clamp
   • For securing the selector lever handle to the selector lever
   • Removing and Installing. Refer to SELECTOR LEVER KNOB, SERVICING, ASSEMBLY OVERVIEW .
5. Selector Lever Boot
   • Separate from the selector lever handle SELECTOR LEVER KNOB, SERVICING, ASSEMBLY OVERVIEW 
6. Trim Ring
   • Removing and Installing. Refer to SELECTOR LEVER BOOT, REMOVING FROM SELECTOR LEVER HANDLE .
7. Selector Lever Handle
   • SELECTOR LEVER KNOB, SERVICING, ASSEMBLY OVERVIEW 
   • SELECTOR LEVER HANDLE, REMOVING AND INSTALLING 
8. Selector Lever Transmission Range Position Display Unit -Y26-
   • Removing and Installing. Refer to Selector Lever Transmission Range Position Display Unit -Y26-, REMOVING AND INSTALLING .
9. Screw
   • 1 Nm
   • quantity: 4
10. Selector Lever Sensor System Control Module -J587- with Tiptronic Switch -F189-
    • Removing and Installing. Refer to Selector Lever Sensor System Control Module -J587- WITH Tiptronic Switch -F189-, REMOVING AND INSTALLING .
11. Shift Lock Solenoid -N110-
    • Removing and Installing. Refer to Shift Lock Solenoid -N110-, REMOVING AND INSTALLING .
    • SELECTOR MECHANISM, PERFORMING EMERGENCY RELEASE 
12. Selector Mechanism Function Unit
    • Check function: SELECTOR MECHANISM, CHECKING 
    • SHIFT MECHANISM FUNCTION UNIT, REMOVING AND INSTALLING 
    • SHIFT MECHANISM FUNCTION UNIT, DISASSEMBLING AND ASSEMBLING - ASSEMBLY OVERVIEW 
    • with Transmission Park Selector Switch -F305- installed, Transmission Park Selector Switch -F305-, REMOVING AND INSTALLING 
13. Screw
    • 6.5 Nm
    • quantity: 4
    • for securing the selector mechanism function unit to shift unit
    • With additional threads on screw head for securing bracket to center console
14. Screw
    • 6.4 Nm
    • quantity: 2
    • for securing center bracket to lower selector mechanism cover
15. Screw
    • 10 Nm
    • quantity: 4
    • for securing selector mechanism shift unit to body
16. Selector mechanism shift unit
    • SELECTOR MECHANISM SHIFT UNIT, REMOVING AND INSTALLING 
17. Centering Bracket
    • Must not be reinstalled in damaged or removed, is only necessary for factory production