Transmission Park Selector Switch -F305-, REMOVING AND INSTALLING: Removing

-- Remove selector mechanism function unit SHIFT MECHANISM FUNCTION UNIT, REMOVING AND INSTALLING .

-- Remove shift gate SHIFT GATE, REMOVING AND INSTALLING 

-- Pry out the retaining pin -A- in -direction of arrow- with a screwdriver.

Fig 1: Identifying Part Of Shift Gate -1-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the first micro-switch -B-.

-- Disengage electrical wiring from tab -arrow C- and remove micro-switch from shift mechanism.

-- Disconnect the connector -D- from the shift lock solenoid -N110-.

Fig 2: Identifying Microswitch Removal/Installation

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -E- upward.

-- Push the tab -C- in direction of -arrow 1-.

-- Remove the second micro-switch -B- in direction of -arrow 2-.

-- Disengage electrical line at selector mechanism -arrow A-.