Shift Mechanism Function Unit, Disassembling And Assembling - Assembly Overview: Notes

NOTE:

Coat the bearings and the sliding surfaces with polycarbamide greaseG 052 142 A2.

Fig 1: Identifying Selector Mechanism Function Unit Overview

Courtesy of AUDI OF AMERICA, LLC

1. Function Unit Housing
2. Selector lever position "P" locking lever
   • SELECTOR LEVER POSITION "P" LOCKING LEVER, REMOVING AND INSTALLING 
3. Bushings
   • secures selector lever position "P" locking lever
4. Axial Bearing
   • For the shift gate
5. Bearing Shell
   • For the shift gate
   • Clipped to the function unit housing
6. Locking Plate
   • For the axial bearing
   • Always replace
7. Shift Bearing
   • For the shift gate
8. Bearings
   • For the shift bearing
9. Shift Gate
   • SHIFT GATE, REMOVING AND INSTALLING 
10. Shift Lock Solenoid -N110-
    • Shift Lock Solenoid -N110-, REMOVING AND INSTALLING 
11. Transmission Park Selector Switch -F305-
    • Transmission Park Selector Switch -F305-, REMOVING AND INSTALLING 
12. Emergency Release Lever Guide
    • is clipped into function unit housing
13. Stop Buffer