ATF Cooler, Removing And Installing: Removing

-- Remove the bolts and remove front -1- and rear -2- noise insulation.

Fig 1: Identifying Front/Rear Noise Insulation

Courtesy of AUDI OF AMERICA, LLC

-- Remove both union nuts -4- at top of ATF cooler.

Fig 2: Identifying ATF Lines, Remove/Install Components

Courtesy of AUDI OF AMERICA, LLC

-- Press off clips -2- and -3-.

Fig 3: Identifying Screws On Rear Side Of Radiator

Courtesy of AUDI OF AMERICA, LLC

-- Seal ATF pipes and ATF cooler -4- with clean plugs.

-- Remove ATF cooler -4-.