Overview - Coolant Pump
WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Coolant Pump
- Bolt
- Aluminum bolts 3 Nm +90°
- Replace the aluminum bolts
- Steel bolts 9 Nm
- Tighten diagonally in steps
- Depending on the version aluminum or steel bolts
- Coolant Pump Ribbed Belt Pulley
- Installation position: the word "vorne" (front) facing in drive direction
- Bolt
- 23 Nm
- Coolant Pump
- Removing and installing. Refer to COOLANT PUMP, REMOVING AND INSTALLING .
- Replace the coolant pump if the seal is damaged