Coolant Pump, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Bolts And Wrench - Pin Type 3212

Courtesy of AUDI OF AMERICA, LLC

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- for the coolant pump ribbed belt pulley using a Wrench - Pin Type3212 to counterhold.

-- Remove the bolts -arrows- and remove the coolant pump.

Fig 2: Remove The Bolts

Courtesy of AUDI OF AMERICA, LLC