Left Upper Coolant Pipe On Transmission, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specifications. Refer to OVERVIEW - COOLANT PIPE ON ENGINE .

NOTE:

Secure all hose connections with standard production hose clamps. .

-- Install the pre-catalytic converter. Refer to PRE-CATALYTIC CONVERTER, REMOVING AND INSTALLING .

-- Connect the coolant hose to the coupling. Refer to Figure.

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .