Cylinder Bank 2 (Left) Check Valve, Removing And Installing: Removing

Fig 1: Identifying Bolts -Arrows- And Connector Bracket From Left Engine Mount Bracket

Courtesy of AUDI OF AMERICA, LLC

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the engine mount. Refer to ENGINE MOUNT AND ENGINE SUPPORT, REMOVING AND INSTALLING .

-- If equipped, remove the nuts -arrows- and the connector bracket from the left engine support.

-- Remove the bolts -arrows- and the left engine support.

Fig 2: Removing Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

Fig 3: Bolts, Clamp & Check Valve

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the clamp -2- and remove the coolant hose.

-- Remove the check valve -1-.