Check Valve For Cylinder Bank 1 (Right), Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the starter and generator. Refer to STARTER, REMOVING AND INSTALLING .

-- Remove the engine mount. Refer to ENGINE MOUNT AND ENGINE SUPPORT, REMOVING AND INSTALLING .

-- Remove the air filter. Refer to AIR FILTER .

-- Remove the bolts -arrows- and the left engine support.

Fig 1: Removing Bolt

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -arrow-.

Fig 2: Remove Bolt & Check Valve

Courtesy of AUDI OF AMERICA, LLC

-- Remove the check valve -1-.