Left Front Coolant Pipes, Removing And Installing: Installing
WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
- Tightening specifications. Refer to OVERVIEW - COOLANT PIPES .
NOTE:
Secure all hose connections with hose clamps of the same type as those equipped by the factory. .
-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .
-- Install the noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .