LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (3.0L - Crankshaft & Cylinder Block - Engine Code(S): CJTB, CJTC, CNAA, CJWB, CJWC, CJWE, CTWA, CTWB) >> 13 Crankshaft, Cylinder Block >> Cylinder Block - Belt Pulley Side >> Supercharger Ribbed Belt TENSIONER, Removing And Installing >> Removing

Supercharger Ribbed Belt TENSIONER, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Ribbed Belt Tensioner -2- And Bolt -1-
GWWA13-10654Courtesy of AUDI OF AMERICA, LLC

-- Remove the Air Conditioning (A/C) compressor ribbed belt. Refer to SUPERCHARGER RIBBED BELT, REMOVING AND INSTALLING .

-- Remove the bolt -1- and remove the ribbed belt tensioner -2-.

NOTE:

Ignore Locking Pin T10060A.

scientia non olet · About LEMON Manuals