LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (3.0L - Engine Mechanical - General & Technical Data - Engine Code(S): CJTB, CJTC, CNAA, CJWB, CJWC, CJWE, CTWA, CTWB) >> 00 General, Technical Data >> Safety Precautions >> Before Opening High Pressure Fuel Injection System

Before Opening High Pressure Fuel Injection System

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • The injection system is separated into a high-pressure section (maximum approximately 120 bar (1740 psi)) and a low-pressure section (approximately 6 bar (87 psi)).
  • Before opening high pressure area, fuel pressure must be reduced to a residual pressure of approximately 6 bar (87 psi). Refer to SAFETY PRECAUTIONS AND CLEAN WORKING CONDITIONS .
scientia non olet · About LEMON Manuals