Valve Body, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Connector Bolt -Arrow-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the ATF pan. Refer to ATF PAN, REMOVING AND INSTALLING .

-- Remove the ATF strainer. Refer to OIL SCREEN, REMOVING AND INSTALLING .

-- Disconnect the connector -arrow-.

-- Carefully disconnect the connector -arrows-.

Fig 2: Carefully Releasing Connector And Pulling Off

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -arrow- from the Transmission Fluid Temperature Sensor -G93-.

Fig 3: Identifying Transmission Fluid Temperature Sensor G93

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the bolts -arrows- diagonally and remove the valve body.

Fig 4: Identifying Valve Body Bolts

Courtesy of AUDI OF AMERICA, LLC