LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Oil Pan, Oil Screen, Valve Body Selector Lever & MULTIFUNCTION Transmission Range Switch -F125-) >> 38 Gears, Hydraulic Controls >> Oil Pan, Oil Screen And Valve Body >> Transmission Output Speed Sensor -G195-, REMOVING AND INSTALLING >> Installing

Transmission Output Speed Sensor -G195-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Insert the Transmission Output Speed Sensor -G195- and tighten the bolt -arrow- to 10 Nm.

-- Install the valve body. Refer to VALVE BODY, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals