Transmission Fluid Auxiliary Hydraulic Pump 2 -V476-, REMOVING AND INSTALLING, VEHICLES WITH START/STOP SYSTEM: Removing

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Do not start the engine or tow the vehicle if there is no ATF in the engine or if the auxiliary hydraulic pump is removed.

-- Drain the ATF. Refer to ATF, DRAINING .

-- Place the Used Oil Collection And Extraction UnitSMN372500 under the transmission.

-- Disconnect the connector -A-.

Fig 1: Disconnect The Connector -A- And Remove The Auxiliary Hydraulic Pump Bolts -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1- and the Transmission Fluid Auxiliary Hydraulic Pump 2 -V476-.