00 General, Technical Data: Capacities

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

8-Speed Automatic Transmission 0C8	Capacities
Transmission initial filling for engine type: V6 3.0L - TFSI	Refer to Standard Maintenance Service
Transmission initial filling for engine type: V6 3.0L - TDI	Refer to Standard Maintenance Service
Transmission initial filling for engine type: V8 4.2L - TDI	Refer to Standard Maintenance Service
ATF cooling system	Refer to Standard Maintenance Service
ATF change	No ATF change Permanent fill Changing only after repair, for example, when removing the ATF pan. Refer to Standard Maintenance Service
Lubricant	ATF, refer to appropriate FLUID CAPACITIES TABLE Information in Maintenance.

CAUTION:

Using the incorrect ATF will result in malfunctions or transmission failure.

Only ATF available as a replacement part for the 8-speed automatic transmission 0C8 may be used in the planetary gear. Refer to appropriate FLUID CAPACITIES TABLE Information in Maintenance.

-- Refer to ATF LEVEL INSIDE TRANSMISSION .