Selector Lever Boot, Removing From Selector Lever Handle: Removing
WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the handle from the selector lever. Refer to SELECTOR LEVER HANDLE, REMOVING AND INSTALLING .
-- Tie the spring tabs -A- on the selector lever handle together with a cable tie -C- as illustrated.
-- Push the selector lever boot -C- over the tabs in direction of -arrow-.
-- Remove the cable tie and remove the both the sleeve and selector lever boot from the selector lever.