LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (8-Speed Automatic Transmission 0C8) >> 37 Controls, Housing >> ATF Level Inside Transmission >> General Information

General Information

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Measure the Length of the Bleed Pipe on Oil FillerVAS6262A. Shorten it if Necessary.  Refer to GENERAL INFORMATION .

Fig 1: Identifying Shortening Pipe On Adapter For Oil Filling VAS 6262 A
GWWN34-11768Courtesy of AUDI OF AMERICA, LLC

It is necessary to shorten the bleed pipe on the adapter for oil filling Oil FillerVAS6262A to dimension -a- so that it cannot touch the bottom of the oil container.

NOTE:

Dimension -a- is measured starting from the shaft (the green surface) on the adapter for oil filling Oil FillerVAS6262A.

-- Mark the dimension on the bleed pipe and then shorten it using pipe cutter Brake Line Tool Kit - Pipe CutterVAS6056/2.

Fig 2: Cutting Pipe
GWWN34-11769Courtesy of AUDI OF AMERICA, LLC

-- Clean the Oil FillerVAS6262A.