Cover With Oil Separator, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Fuel Pressure Sensor -G247-, Vacuum Hose And Intake Manifold Lower Section Bolt/Nut

Courtesy of AUDI OF AMERICA, LLC

-- Remove the crankcase ventilation hoses. Refer to CRANKCASE VENTILATION HOSES, REMOVING AND INSTALLING .

-- Remove the upper coolant pipe. Refer to UPPER COOLANT PIPE, REMOVING AND INSTALLING .

-- Remove the lower left intake manifold section. Refer to INTAKE MANIFOLD LOWER SECTION WITH FUEL RAIL, REMOVING AND INSTALLING .

-- Remove the bolts -arrows-.

Fig 2: Oil Separator Cover -1- And Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the high pressure lines and oil separator cover -1-.