LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (3.0L - Lubrication - Engine Code(S): CJTB, CJTC, CNAA, CJWB, CJWC, CJWE, CTWA, CTWB) >> 17 Lubrication >> Oil Pan Upper And Lower Sections, Oil Pump And Oil Cooler >> Oil Pump, Removing And Installing >> Installing

Oil Pump, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the seal and O-ring.

-- Install oil pump onto the driveshaft and fasten.

-- Install lower oil pan section. Refer to LOWER OIL PAN SECTION, REMOVING AND INSTALLING .

-- Fill with engine oil and check the oil level. Refer to Standard Maintenance Service .

scientia non olet · About LEMON Manuals