LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (3.0L - Lubrication - Engine Code(S): CJTB, CJTC, CNAA, CJWB, CJWC, CJWE, CTWA, CTWB) >> 17 Lubrication >> Oil Pan Upper And Lower Sections, Oil Pump And Oil Cooler >> Notes

Oil Pan Upper And Lower Sections, Oil Pump And Oil Cooler: Notes

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Danger of catalytic converter damage.

  • The oil level must not exceed the "MAX" marking.
NOTE:

If large quantities of metal particles or abraded material are detected during engine repairs, it may mean the crankshaft or rod bearings are damaged. To prevent damage, perform the following steps after completing the repair: carefully clean the oil channels and replace the oil spray jets, the oil cooler and the oil filter. 

Oil capacities, specifications and viscosity classes. Refer to Standard Maintenance Service .

Oil injector jet for piston cooling. Refer to Fig 1.

Fig 1: Oil Spray Jet And Bolt
GWWA13-10106Courtesy of AUDI OF AMERICA, LLC