LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (3.0L - Ignition/Glow Plug System - Engine Code: CNRB) >> 28 Ignition/Glow Plug System >> Removal And Installation >> Glow Plugs >> Installing

Glow Plugs: Installing

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Carefully install the glow plugs by hand or with a hose without bending them.

-- Tighten the glow plugs using the Hinged Socket3220 and a suitable torque wrench.

scientia non olet · About LEMON Manuals