LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (3.0L - Ignition/Glow Plug System - Engine Code: CNRB) >> 28 Ignition/Glow Plug System >> Removal And Installation >> Engine Speed Sensor -G28- >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Install the noise insulation. Refer to NOISE INSULATION OVERVIEW .

scientia non olet · About LEMON Manuals