LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (3.0L - Cylinder Head & VALVETRAIN - Engine Code: CNRB) >> 15 Cylinder Head, VALVETRAIN >> Cylinder Head >> Cylinder Head, Removing And Installing >> Loosen the cylinder head bolts in the sequence -1 to 8-

Loosen the cylinder head bolts in the sequence -1 to 8-

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the bolts and the cylinder head carefully.

CAUTION:

Danger of damaging the glow plugs when removing the cylinder head.

  • Do not lay the removed cylinder head on the sealing surface with the glow plugs installed otherwise the glow plugs will protrude slightly past the sealing surface
scientia non olet · About LEMON Manuals