Transfer Case Overview
WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Tightening specification, refer to -Item 7- TRANSMISSION CARRIER AND CONSOLE OVERVIEW.
- Transmission Carrier
- Removing and Installing. Refer to TRANSMISSION CARRIER AND CONSOLE, REMOVING AND INSTALLING .
- Bolt
- Tightening specification, refer to -Item 6- TRANSMISSION CARRIER AND CONSOLE OVERVIEW.
- Bolt
- 20 Nm + 90°
- Quantity: 12
- Replace
- Alignment Sleeve
- Quantity: 2
- Transfer Case
- Removing and Installing. Refer to TRANSFER CASE, REMOVING AND INSTALLING .
- Replace shaft seals. Refer to TRANSFER CASE SHAFT SEALS .
- O-ring
- Replace
- Diameter 28 mm
- Color: green
- Locking Ring
- Replace
- Diameter 28 mm
- Color: silver
- Balance Weight
- Installed depending on the version.
- Bolt
- 32 Nm
- Self-locking
- Replace
- Bolt
- 50 Nm
- Self-locking
- Replace
- Balance Weight
- Installed depending on the version.
- Bracket
- Removing and Installing. Refer to TRANSMISSION CARRIER AND CONSOLE, REMOVING AND INSTALLING .
- Bolt
- Tightening specification, refer to -Item 4- TRANSMISSION CARRIER AND CONSOLE OVERVIEW.
- Bolt
- Tightening specification, refer to -Item 5- TRANSMISSION CARRIER AND CONSOLE OVERVIEW.