LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (3.0L - Exhaust System & Emission Controls - Engine Code(S): CJTB, CJTC, CNAA, CJWB, CJWC, CJWE, CTWA, CTWB) >> 26 Exhaust System, Emission Controls >> Secondary Air Injection System >> Secondary Air Injection Right Combination Valve, Removing And Installing >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Replace the seal.

Secure all hose connections with hose clamps of the same type as those equipped by the factory.

-- Install the Throttle Valve Control Module -J338-. Refer to Throttle Valve Control Module -J338-, REMOVING AND INSTALLING .

-- Install the right front wheel. Refer to WHEEL, CHANGING AND MOUNTING .

scientia non olet · About LEMON Manuals